Ilive Sound Bar Model Itp180b User Manual 0b

View and Download ILive ITP180B user manual online. Bar Speaker with Dock for iPhone/iPod. ITP180B Home Cinema speakers pdf manual download. View & download of more than 337 Ilive PDF user manuals, service manuals, operating guides. Docking station user manuals, operating guides & specifications.

USER'S GUIDE

V:1707-0201-10

ITP180B

Bar Speaker with Dock for iPhone/iPod

For the most up-to-date version of this User's Guide, go to www.ilive.net

•CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

•WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

•AVERTISSEMENT: Pour réduire le risque d'incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l'humidité.

•CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

•WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

•WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.

•WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

•CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•PRÉCAUTION: Danger d'explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l'équivalent.

•WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.

•WARNING: The remote control's button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste

•WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.

Main plug is used as disconnect device and it should remain readily operable during intended use.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas.

No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

1.Read these Instructions.

2.Keep these Instructions.

3.Heed all Warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

•The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.

•Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être débranchée du secteur.

•Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au feu ou autres choses de semblable.

•Caution marking is located at the bottom of the apparatus.

Les marquages sont inscrits en bas de l'appareil.

•The marking information is located at the bottom of apparatus.

Les précautions d'emploi sont inscrites en bas de l'appareil.

Included

•ITP180B

•Remote control: requires 2 AAA batteries (not included)

•Docking brackets for iPhone/iPod (6)

•FM wire antenna

•Audio/video cable

•Wall-mount hardware

TABLE OF CONTENTS

INTRODUCTION

SETUP

CLOCK, ALARM, AND SLEEP TIMER

IPHONE/IPOD AND FM RADIO

AUXILIARY INPUT, LINE INPUT AND

SUBWOOFER OUTPUT

BASIC CONNECTIVITY

AV INPUT AND VIDEO INPUT

MOUNTING TO A WALL

COMPANY INFORMATION

INTRODUCTION

POWER

Press to turn the bar speaker off or on.

SOURCE

Press to switch between iPhone/ iPod, AV, AUX, and FM modes.

VOLUME

Press to adjust the volume.

PLAY/PAUSE

Press to play or pause a docked iPhone or iPod.

iPod DRAWER

Press to open or close the motorized dock for iPhone/iPod.

LINE INPUT (3.5mm)

AUXILIARY INPUT

SUBWOOFER

OUTPUT

FM ANTENNA CONNECTION

A/V INPUT

VIDEO INPUT

RESET

Press using a paperclip or like object to reset the bar speaker to it's default settings.

S-VIDEO OUTPUT

VIDEO OUTPUT

STANDBY/ON

Press to turn the bar speaker off or on.

MUTE

Press to mute the volume.

ALARM

With the power off, press to set the alarm.

CLOCK

With the power off, press to set the clock.

SLEEP

Press repeatedly to set the sleep timer.

BASS

With the EQ set to FLAT, press to adjust the levels of bass.

REV/FWD/MIN/HR

Press to rewind or fast forward a docked iPhone or iPod. Press to adjust the hour and minute when setting the clock or alarm.

MENU

Press skip through menus on a docked iPhone or iPod.

TUN/SKIP

Press to skip between tracks on a docked iPhone or iPod. Press to tune the radio.

ALBUM/CHAPTER/ PLAYLIST

Press to skip through albums, chapters, or playlists on a docked iPhone or iPod.

SOURCE

Press to switch between AV, AUX, FM, and iPhone/iPod modes.

iPod DRAWER

Press to open or close the motorized dock for iPhone/iPod.

NUMBER KEYPAD

REPEAT

Press to repeat a single track or entire album on a docked iPhone or iPod.

TREBLE

With the EQ set to FLAT, press to adjust the levels of treble.

MENU UP/DN

Press to navigate up and down in menus on a docked iPhone or iPod.

SELECT

Press to make selections on a docked iPhone or iPod.

SHUFFLE

Press to play songs from a docked iPhone or iPod in a random order.

EQ

Press to adjust the

EQ.

VOLUME

Press to adjust the volume.

PLAY/PAUSE

Press to play or pause a docked iPhone or iPod.

STOP

Press to stop a docked iPhone or iPod during play.

MEMORY

Press to cycle

through saved radio stations.

iPod

Power

Plug the attached AC cord into a standard AC power outlet to power the bar speaker.

Remote

Requires 2 AAA batteries (not included)

FM Antenna

Plug the FM Wire Antenna (included) into the FM Antenna Connection.

Setting the Alarm

1Press the POWER button to turn the power on.

2Adjust the volume to the desired level.

3Press the POWER button to turn the power off.

4Press the ALARM button on the remote control.

The alarm time on the display will begin blinking.

5Press the REV/MIN and FWD/HR buttons on the remote to adjust the minute and hour.

6Press the SOURCE button on the bar speaker to switch to the desired alarm source.

7Wait 5 seconds to finish setting the alarm.

ALARM will appear on the display when the alarm is set.

8Press the ALARM button to cancel the alarm.

CLOCK, ALARM, AND SLEEP TIMER

Setting the Clock

1Press the POWER button to turn the power off.

2Press the CLOCK button on the remote control.

The time on the display will begin blinking.

3Press the REV/MIN and FWD/HR buttons on the remote to adjust the minute and hour.

4Wait 5 seconds to finish setting the clock.

Setting the Sleep Timer

1Press the POWER button to turn the power on.

2Press the SOURCE button on the bar speaker to switch to the desired sleep timer source.

3Press the SLEEP button repeatedly to set the sleep timer.

4After the set sleep time has expired, the bar speaker will automatically power off.

Docking an iPhone/iPod

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to iPhone/iPod mode.

3Press the iPod DRAWER button to open the MOTORIZED DOCK FOR iPhone/iPod

4Locate the numbered bracket that fits the iPhone/iPod model that will be docked.

Searching flight simulator x manual download. PDF By Team SDB For Microsoft Flight Simulator FSX – Acceleration FSX User Manual. Each providing 35,000shp, the hull had to be enlarged to accommodate the size of the reactors, which meant a much larger flight deck. One additional feature that identified Enterprise as unique among carriers was. Oct 25, 2018  ms fsx Download – Free copy to your computers and.microsoft fs x copy to your computer no cost download – fsx demo, ms fsx Gold Edition, fsx Screensaver, and many. Fsx Manual Download – Flight Silmulator – Get.PDF fsx ManualFlight Simulator X G15 Applet Manual. For Version 1.5.40.445. Read moreMicrosoft Flight Simulator X Manual Download – PDF. Fsx manual pdf download.

Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.

5Snap the bracket into place over the iPhone/iPod connector in the motorized dock.

6Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod.

When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge.

OWNER'S MANUAL Powerful & Clear sound Blu-ray 3D ™ Home Cinema System MODEL HX995TZ (HX995TZ/ SX95TZ-S/C/D) P/NO: MFL65220878 Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. Home LG Home Theater System. LG Home Theater System User Manuals. (HT304SQ-DH, SH34SQ-S/W)P/NO: MFL61944503 As an E NERGY STA R ®Partner, LG has determined that this product or product models meet the E NERGY STA R ®guidelines for energy efficiency. ENERGY STA R ®is a U.S. Registered mark. Full HD up-scaling (1080p. Download 781 Lg Home Theater System PDF manuals. User manuals, Lg Home theater system Operating guides and Service manuals. LG Home Theater System User Manuals. LG Bb5520a Owners Manual Add to Favourites. Please read this manual carefully before operating your set and retain it for future reference. P/NO: SAC35494003 BB5520A (BB5520A, SHX56-D) OWNER'S MANUAL Network 3D Blu-ray™ Sound Bar. OWNER'S MANUAL Blu-ray™/ DVD Home Theater System BH4120S. Lg home theater system user manual. LG LH-LGEPT Manuals & User Guides. User Manuals, Guides and Specifications for your LG LH-LGEPT Home Theater System. Database contains 1 LG LH-LGEPT Manuals (available for free online viewing or downloading in PDF): Service manual.

Playing an iPhone/iPod

1Follow the instructions for docking an iPhone/iPod.

2Press the PLAY/PAUSE button to begin playing music from the docked iPhone or iPod.

Tuning the FM Radio

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to FM radio mode.

3Press the TUN/SKIP buttons on the remote to tune the FM radio.

Saving a Radio Station

1Follow the instructions for tuning the FM radio.

2After tuning to the desired station, press the MEM button.

3Press the MENU UP or MENU DN buttons on the remote to select a preset.

4Press the MEM button to save the current radio station to the selected preset.

Up to 20 stations can be saved to the bar speaker's memory.

Listening to Saved Radio Stations

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to FM radio mode.

3Press the MEMORY buttons on the remote to cycle through saved radio stations.

Using the Subwoofer Output

1Use an RCA cable (included) to connect an external subwoofer to the SUBWOOFER OUTPUT.

2When audio is played through any source, the bar speaker will automatically use the connected subwoofer.

Using the Auxiliary Input

1Connect an RCA cable (included) to the AUXILIARY INPUTS on the bar speaker and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AUX mode.

The AUXILIARY INPUTS will not work when the LINE INPUT is connected.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

Using the Line Input

1Connect a 3.5mm line input cable (not included) to the LINE INPUT on the bar speaker and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AUX mode.

When the LINE INPUT is connected, the AUXILIARY INPUTS will not work.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

BASIC CONNECTIVITY

Below, you'll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them.

AUDIO &/Or

VIDEO

Using the AV Input

1Connect an RCA cable (included) to the AV INPUTS and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AV mode.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

Using the Video Input

1Connect an RCA cable (included) to the VIDEO INPUT and a video source (DVD player, Cable or Satellite Tuner, Gaming Console, or VCR).

2Connect the bar speaker to a television using the VIDEO OUTPUT or S-VIDEO OUTPUT.

3Press the POWER button to turn the bar speaker on.

4Press the SOURCE button to switch to AV mode.

5Use the native controls on the connected video device to control video that runs through the bar speaker.

AV INPUT AND VIDEO INPUT

Using the Video Output

1Connect an RCA cable (included) to the VIDEO OUTPUT and a television.

2Adjust the connected television to the proper input setting.

3Video from a docked iPhone/iPod, or a connected DVD player can now be played through the bar speaker to the connected television.

Using the S-Video Output

The S-Video Output will only output video from a docked iPod/iPhone.

1Connect an S-Video cable (not included) to the S-VIDEO OUTPUT and a television.

2Adjust the connected television to the proper input setting.

3Video from a docked iPhone/iPod can now be played through the bar speaker to the connected television.

Important Notes

We recommend having this bar speaker professionally mounted.

The included spacers should be used at your discretion to extend the face of the bar speaker farther from the wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker needs to be flush with the face of the television.

Required Tools

•Manual or Power Screwdriver

•Stud Finder

•Pencil

•Tape Measure

Ilive Sound Bar Instruction Manual

Press to open or close the motorized dock for iPhone/iPod.

LINE INPUT (3.5mm)

AUXILIARY INPUT

SUBWOOFER

OUTPUT

FM ANTENNA CONNECTION

A/V INPUT

VIDEO INPUT

RESET

Press using a paperclip or like object to reset the bar speaker to it's default settings.

S-VIDEO OUTPUT

VIDEO OUTPUT

STANDBY/ON

Press to turn the bar speaker off or on.

MUTE

Press to mute the volume.

ALARM

With the power off, press to set the alarm.

CLOCK

With the power off, press to set the clock.

SLEEP

Press repeatedly to set the sleep timer.

BASS

With the EQ set to FLAT, press to adjust the levels of bass.

REV/FWD/MIN/HR

Press to rewind or fast forward a docked iPhone or iPod. Press to adjust the hour and minute when setting the clock or alarm.

MENU

Press skip through menus on a docked iPhone or iPod.

TUN/SKIP

Press to skip between tracks on a docked iPhone or iPod. Press to tune the radio.

ALBUM/CHAPTER/ PLAYLIST

Press to skip through albums, chapters, or playlists on a docked iPhone or iPod.

SOURCE

Press to switch between AV, AUX, FM, and iPhone/iPod modes.

iPod DRAWER

Press to open or close the motorized dock for iPhone/iPod.

NUMBER KEYPAD

REPEAT

Press to repeat a single track or entire album on a docked iPhone or iPod.

TREBLE

With the EQ set to FLAT, press to adjust the levels of treble.

MENU UP/DN

Press to navigate up and down in menus on a docked iPhone or iPod.

SELECT

Press to make selections on a docked iPhone or iPod.

SHUFFLE

Press to play songs from a docked iPhone or iPod in a random order.

EQ

Press to adjust the

EQ.

VOLUME

Press to adjust the volume.

PLAY/PAUSE

Press to play or pause a docked iPhone or iPod.

STOP

Press to stop a docked iPhone or iPod during play.

MEMORY

Press to cycle

through saved radio stations.

iPod

Power

Plug the attached AC cord into a standard AC power outlet to power the bar speaker.

Remote

Requires 2 AAA batteries (not included)

FM Antenna

Plug the FM Wire Antenna (included) into the FM Antenna Connection.

Setting the Alarm

1Press the POWER button to turn the power on.

2Adjust the volume to the desired level.

3Press the POWER button to turn the power off.

4Press the ALARM button on the remote control.

The alarm time on the display will begin blinking.

5Press the REV/MIN and FWD/HR buttons on the remote to adjust the minute and hour.

6Press the SOURCE button on the bar speaker to switch to the desired alarm source.

7Wait 5 seconds to finish setting the alarm.

ALARM will appear on the display when the alarm is set.

8Press the ALARM button to cancel the alarm.

CLOCK, ALARM, AND SLEEP TIMER

Setting the Clock

1Press the POWER button to turn the power off.

2Press the CLOCK button on the remote control.

The time on the display will begin blinking.

3Press the REV/MIN and FWD/HR buttons on the remote to adjust the minute and hour.

4Wait 5 seconds to finish setting the clock.

Setting the Sleep Timer

1Press the POWER button to turn the power on.

2Press the SOURCE button on the bar speaker to switch to the desired sleep timer source.

3Press the SLEEP button repeatedly to set the sleep timer.

4After the set sleep time has expired, the bar speaker will automatically power off.

Docking an iPhone/iPod

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to iPhone/iPod mode.

3Press the iPod DRAWER button to open the MOTORIZED DOCK FOR iPhone/iPod

4Locate the numbered bracket that fits the iPhone/iPod model that will be docked.

Searching flight simulator x manual download. PDF By Team SDB For Microsoft Flight Simulator FSX – Acceleration FSX User Manual. Each providing 35,000shp, the hull had to be enlarged to accommodate the size of the reactors, which meant a much larger flight deck. One additional feature that identified Enterprise as unique among carriers was. Oct 25, 2018  ms fsx Download – Free copy to your computers and.microsoft fs x copy to your computer no cost download – fsx demo, ms fsx Gold Edition, fsx Screensaver, and many. Fsx Manual Download – Flight Silmulator – Get.PDF fsx ManualFlight Simulator X G15 Applet Manual. For Version 1.5.40.445. Read moreMicrosoft Flight Simulator X Manual Download – PDF. Fsx manual pdf download.

Each included bracket has a number on it, indicating which iPhone/iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.

5Snap the bracket into place over the iPhone/iPod connector in the motorized dock.

6Connect the iPhone or iPod to the connector inside the Dock for iPhone/iPod.

When the speaker is plugged in, using AC power, the docked iPhone or iPod will charge.

OWNER'S MANUAL Powerful & Clear sound Blu-ray 3D ™ Home Cinema System MODEL HX995TZ (HX995TZ/ SX95TZ-S/C/D) P/NO: MFL65220878 Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. Home LG Home Theater System. LG Home Theater System User Manuals. (HT304SQ-DH, SH34SQ-S/W)P/NO: MFL61944503 As an E NERGY STA R ®Partner, LG has determined that this product or product models meet the E NERGY STA R ®guidelines for energy efficiency. ENERGY STA R ®is a U.S. Registered mark. Full HD up-scaling (1080p. Download 781 Lg Home Theater System PDF manuals. User manuals, Lg Home theater system Operating guides and Service manuals. LG Home Theater System User Manuals. LG Bb5520a Owners Manual Add to Favourites. Please read this manual carefully before operating your set and retain it for future reference. P/NO: SAC35494003 BB5520A (BB5520A, SHX56-D) OWNER'S MANUAL Network 3D Blu-ray™ Sound Bar. OWNER'S MANUAL Blu-ray™/ DVD Home Theater System BH4120S. Lg home theater system user manual. LG LH-LGEPT Manuals & User Guides. User Manuals, Guides and Specifications for your LG LH-LGEPT Home Theater System. Database contains 1 LG LH-LGEPT Manuals (available for free online viewing or downloading in PDF): Service manual.

Playing an iPhone/iPod

1Follow the instructions for docking an iPhone/iPod.

2Press the PLAY/PAUSE button to begin playing music from the docked iPhone or iPod.

Tuning the FM Radio

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to FM radio mode.

3Press the TUN/SKIP buttons on the remote to tune the FM radio.

Saving a Radio Station

1Follow the instructions for tuning the FM radio.

2After tuning to the desired station, press the MEM button.

3Press the MENU UP or MENU DN buttons on the remote to select a preset.

4Press the MEM button to save the current radio station to the selected preset.

Up to 20 stations can be saved to the bar speaker's memory.

Listening to Saved Radio Stations

1Press the POWER button to turn the bar speaker on.

2Press the SOURCE button to switch to FM radio mode.

3Press the MEMORY buttons on the remote to cycle through saved radio stations.

Using the Subwoofer Output

1Use an RCA cable (included) to connect an external subwoofer to the SUBWOOFER OUTPUT.

2When audio is played through any source, the bar speaker will automatically use the connected subwoofer.

Using the Auxiliary Input

1Connect an RCA cable (included) to the AUXILIARY INPUTS on the bar speaker and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AUX mode.

The AUXILIARY INPUTS will not work when the LINE INPUT is connected.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

Using the Line Input

1Connect a 3.5mm line input cable (not included) to the LINE INPUT on the bar speaker and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AUX mode.

When the LINE INPUT is connected, the AUXILIARY INPUTS will not work.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

BASIC CONNECTIVITY

Below, you'll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them.

AUDIO &/Or

VIDEO

Using the AV Input

1Connect an RCA cable (included) to the AV INPUTS and an audio source.

2Press the POWER button to turn the bar speaker on.

3Press the SOURCE button to switch to AV mode.

4Use the native controls on the connected audio device to begin playing music through the connected bar speaker.

Using the Video Input

1Connect an RCA cable (included) to the VIDEO INPUT and a video source (DVD player, Cable or Satellite Tuner, Gaming Console, or VCR).

2Connect the bar speaker to a television using the VIDEO OUTPUT or S-VIDEO OUTPUT.

3Press the POWER button to turn the bar speaker on.

4Press the SOURCE button to switch to AV mode.

5Use the native controls on the connected video device to control video that runs through the bar speaker.

AV INPUT AND VIDEO INPUT

Using the Video Output

1Connect an RCA cable (included) to the VIDEO OUTPUT and a television.

2Adjust the connected television to the proper input setting.

3Video from a docked iPhone/iPod, or a connected DVD player can now be played through the bar speaker to the connected television.

Using the S-Video Output

The S-Video Output will only output video from a docked iPod/iPhone.

1Connect an S-Video cable (not included) to the S-VIDEO OUTPUT and a television.

2Adjust the connected television to the proper input setting.

3Video from a docked iPhone/iPod can now be played through the bar speaker to the connected television.

Important Notes

We recommend having this bar speaker professionally mounted.

The included spacers should be used at your discretion to extend the face of the bar speaker farther from the wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker needs to be flush with the face of the television.

Required Tools

•Manual or Power Screwdriver

•Stud Finder

•Pencil

•Tape Measure

Ilive Sound Bar Instruction Manual

•Level

Included Hardware

•(2) Wall Mount Brackets

•(4) Long Screws

•(4) Short Screws

•(2) 1/4' Spacers

•(2) 1/2' Spacers

•(2) 3/4' Spacers

International Support

To download this User's Guide in English, Spanish, or French, visit the support section at www.ilive.net.

Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.ilive.net.

Pour télécharger ce guide de l'utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.ilive.net.

Contact Information

Address: 2116 Carr Street, St. Louis MO, 63106

Phone: 1-314-621-2881

Fax: 1-314-588-1805

Email: customerservice@ilive.net

Parts Email: partsinfo@dpi-global.com

Website: www.ilive.net

© 2009 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice

CUSTOMER HELPLINE | 1-314-621-2881

iLive | ITP180B

9

CLOCK, ALARM, AND SLEEP TIMER

Setting the Clock

Setting the Sleep Timer

Setting the Alarm

1 Press the POWER button to turn the

power off.

2 Press the CLOCK button on the

remote control.

The time on the display will begin

blinking.

3 Press the REV/MIN and FWD/HR

buttons on the remote to adjust the

minute and hour.

4 Wait 5 seconds to finish setting the

clock.

1 Press the POWER button to turn the

power on.

2 Press the SOURCE button on the

bar speaker to switch to the desired

sleep timer source.

Ilive Sound Bar Model Itp180b User Manual 0b 4

3 Press the SLEEP button repeatedly to

set the sleep timer.

4 After the set sleep time has expired,

the bar speaker will automatically

power off.

1 Press the POWER button to turn the

power on.

2 Adjust the volume to the desired

level.

3 Press the POWER button to turn the

power off.

4 Press the ALARM button on the

remote control.

The alarm time on the display will

begin blinking.

5 Press the REV/MIN and FWD/HR

buttons on the remote to adjust the

minute and hour.

6 Press the SOURCE button on the

bar speaker to switch to the desired

alarm source.

7 Wait 5 seconds to finish setting the

alarm.

ALARM will appear on the display

when the alarm is set.

8 Press the ALARM button to cancel

the alarm.